Craft Bait
Hologram
Attractive Big Eye
Chugger
Heavy Duty 300lbs Swivel
Solid Stainless Steel Finishing
Incredidle Hologram
Poppppp.....poppp...
Daring....
nice holographic effect
beautiful hologram
these are the basic tools needed for the PR connection - braid scissors, lighter and PR bobbin and holder.
I've used 80lb colored braid and 200lb leader so the connection can easily be seen.
thread the end of the braid throught the bobbin holder, wrap it around the bobbin for 10 -12 turns then wrap it around the bobbin arm 4 - 6 turns. Hold the braid tag together with the leader tag, wrap them together around your fingers to secure.
begin by making spirals for about 10cms. You are winding away from the leader tag end.
spiral wrap for 10cm, then spin (serve) tight wraps for 1cm.
now reverse the direction and spin tight close wraps. Allow the tip of the holder to contact the leader, this ensures tight wraps. If the line comes out too freely, the tip will not contact the leader as there is not enough tension. Add more tension with another 1 or 2 turns around the bobbin arm. You are wrapping back towards the leader tag end.
continue spinning tight wraps along the leader.
spin tight wraps for 7 - 10cm
this is how the tight wraps look
pinch tightly at the last wrap
with the other hand, remove braid from the bobbin and holder. 
while still pinching down, tie a half hitch to lock in the last wrap.
continue to add half hitches taking care to alternate the direction of each half hitch, this serves to lock each half hitch in place. After about 1cm of half hitches cut the leader leaving a 3 - 4 mm tag.
use a lighter with a small flame to ball the tag end. This is a most critical procedure as the flame will easily damage the braid so protect the braid with your finger tips and finger nails.
add another half hitch or 2 up to the tag ball.
continue alternating half hitches along the braided line for 1cm to provide a ramp to the leader tag.
close off the half hitches by a 5 - 6 wraps back toward the knot
pull up the braid tag to terminate the knot
cut braid tag close
completed PR knot, streamlined and very strong. The leader used here is 200lb mono for the benefit of these images. I normally don't use such heavy mono leaders.
Monster Mesh
Produce By Daiwa
Fuji Reel Seat
Fuji SIC Guild
PE 3-6, Jig 150g-250g, Max Drag 11Kg
Model : M632MHS
take photos first after feel bored for waiting 12 hours journey to Dulang Oil Rig (1st Spot)
Another beauty scenery while our next spot still long-long way to go. Another 12 hours to Pulai Oil Rig
after sleep & eat for first 24 hours, i just get my energy for looking at first oil rig..... time for fishing
oil rig at night, all GT & pelagic fish are hunting for small fish near the oil rig column & below the api boreng
Overall Catches
Next time we'll try spearfishing style here
very daring face
weight : 80 gram
luminous hologram & fluorescent body
